500m/Min PP Polypropylene Spinning Beam for Nonwoven fabrics

Product Description

marrifnld Spunbond Nonwoven Spinind Manifold Machine spinning Beam box Spinning Marrifnld Machine 

 

 

The function of spinning box is to divide the melt input by metering pump into spinning components under the action of pressure and heat to heat the melt. 1. The spinning box adopts heat conduction oil furnace for circulating heating and insulation, with reasonable structure, beautiful appearance and low energy consumption. Uniform silk thickness, good handle of monofilament fiber, no broken silk, hair and other characteristics 3. The spinning assembly consists of the following parts: filter mesh, distribution plate, line spray plate and sealing strip, spinning box PP spunbonded non-woven fabric spinning box is a key equipment in the non-woven fabric production line. The quality of the rotating box directly affects the success of the whole production line, whether the single fiber is thin, whether the feeling is good, and whether the quality of non-woven fabric is good. 2 [structure] the main structures of the rotary box die are: pipe salivation type, "large hanger joint type" and "pipe small hanger type". Special specifications and models can also be designed and produced according to customer requirements. 3 [advantages] in the long-term production process, our company has continuously absorbed the opinions of on-site operators. In order to meet the high-quality needs of customers for non-woven fabrics, through continuous research and improvement, our company has solved the problems of thick monofilament, poor uniformity and poor hand feel of many spinning boxes. HHM series full panel spinning box has been developed to solve the shortcomings of uneven pressure distribution, uneven temperature and large weight deviation, so that the non-woven fabric has uniform, good transverse and longitudinal tensile capacity, thin fiber, good hand feel, no broken silk and hairless. [advantages] at present, the main models of woven non-woven boxes are 3200, 2400 and 1600. In recent years, in the field of health and rapid development of non-woven fabrics, the company follows the pace of the market and cooperates with famous engineering companies to continuously develop new products, products and technologies, which is a rapid development and brings the advantages of the market.

 

Technical Parameters ( Standard Specification) of Our Nonwoven Machine
	Model No.	Gram Weight	MaxSpeed(m/min)	Capacity(T/Days)	Equipment Size
HH-S (single beam)	1.6m	9-250	150	4-6	18*8*12m
	2.4m			5-7	18*10*12m
	3.2m			8-10	18*15*12m
HH-SS (single beam)	1.6m	10-120	350	8-10.5	45*15*12m
	2.4m			10-15	45*18*12m
	3.2m			13-20	45*20*12m
HH-SSS (single beam)	1.6m	10-100	550	12-17	50*15*12m
	2.4m			16-21	50*18*12m
	3.2m			24-30	50*20*12m

 

 

Product Description

 

Spinning machine is one of the main components of melt spinning machine. The polymer melt enters the spinning box after passing through the filter. After the melt is distributed and insulated, it is spun from each spinning position. The box is a rectangular metal box wrapped with insulating layer. Built in melt distribution pipe (must be the same length to avoid dead corners), pump seat and spinneret assembly (L-type and bottom type). All parts in contact with the melt are made of stainless steel. Install the liquid phase or gas phase of biphenyl in the box and heat it with an electric heating rod. Each box can hold 1.2 or more square wire parts.

 

 

Parameter

 

	Length (mm)	Width (mm)	High (mm)	Weight (kg)
1600	2100	500	1300	2000
2400	2500	500	1300	2500
3200	3300	500	1300	3400
4800	5000	500	1300	4000
Parameter above need confirm before your order , customized order also acceptable.

 

 

Image of spinning beam box

 

 

 

 

 

Process Flow:

 

Feeding(suction, dosing, and mixing) → Melt and extruding(with recycling extruder) → Filtering → Metering → Spinning → Quenching → Air drawing → Forming → Calendering → Winding → Slitting → Product.

 

 

 

 

 

Advanced CNC Tools

 

 

 

Exhibition with customer

 

 

 

 

Shipping and packing

 

Machine parts with wooden box or wrapping with PE film , fixed in container keep cargo safe , for small parts or electrical compinent put in carton or wooden box ,or according with customized requirst .

 

 

 

 

FAQ:

 

1.How can i know your machine has good quality?

You can visit our company and we will see many machines in China,because we also have many customers from local market.

2.What is the delivery time for nonwoven machines as usual?

We need 3-6 month to make your order.

3.Will you inspect my order before shipping?

We accept SGS inspection service and buyer own inspect it,we will pay all expense for buyer visiting.

4.How is your after-sale service and warranty?

we provide 12 month warranty and free door to door engineering service in the period.

Free spare parts replacement and online technical support.

5.How long time for machine installation?

It takes 30-60 days for machine installation as usual.

6. What services can we provide?

Accepted Delivery Terms: FOB；

Accepted Payment Currency:USD,HKD,CHF;

Accepted Payment Type: T/T;

Language Spoken:English,Chinese,Spanish,Russian